Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 587 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.125 E-6
<no> Number of capacitance in circuit model. If unspecified the numeric
suffix is set to 1.
Range [def. unit] 1 to 2 [–] The number of capacitances depends on the selected
circuit model.
Parameters Possible circuit models (character data); see circuit models.
*RST value – (see command type description below)
<numeric_value> Capacitance C<no> for the specified circuit model.
Range [def. unit] –1mF to 1 mF [F]. The increment is 1 fF (10
–15
F).
*RST value 1 pF (10
–12
F)
SCPI, Command
Types Device-specific, command or query. In the query form, the
<numeric_value> parameter must be omitted. The command
returns the capacitance value for the specified circuit model.
Example:
*RST; CALC:TRAN:VNET:SEND:DEEM:PAR:C2? CSC
Query the default capacitance C2 for the Serial C, shunt C circuit
model. The response is 1E-012 (1 pF).
CALC:TRAN:VNET:SEND:DEEM:PAR:C2 CSC, 2.2E-12
Increase the capacitance to 2.2 pF.
CALCulate<Ch>:TRANsform:VNETworks:SENDed:DEEMbedding<Ph_pt>:PARa
meters:L<no> CSL | LSC | LSL | SLC | SCL | SLL,<numeric_value>
Specifies the inductance values L1, L2, L3 in the different circuit models for single ended port
deembedding.
<Ch> Channel number.
<Ph_pt> Physical port number
<no> Number of inductance in circuit model. If unspecified the numeric
suffix is set to 1.
Range [def. unit] 1 to 3 [–] The number of inductances depends on the selected
circuit model.
Parameters Possible circuit models (character data); see circuit models.
*RST value – (see command type description below)
<numeric_value> Inductance L<no> for the specified circuit model.
Range [def. unit] –1H to 1 H [H]. The increment is 1 pH (10
–12
H).
*RST value 1 nH (10
–9
H)
SCPI, Command
Types Device-specific, command or query. In the query form, the
<numeric_value> parameter must be omitted. The command
returns the inductance value for the specified circuit model.
Example:
*RST; CALC:TRAN:VNET:SEND:DEEM:PAR:L1? SLL
Query the default inductance L1 for the Shunt L, serial L circuit
model. The response is 1E-009 (1 nH).
CALC:TRAN:VNET:SEND:DEEM:PAR:L1 SLL, 2.2E-9
Increase the inductance to 2.2 nH.