Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 577 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.115 E-6
SCPI,
Command
Types Confirmed, command or query
Example:
*RST; CALC:TRAN:TIME:STAT?
Reset the instrument, activating a frequency sweep, and query
whether the default trace is displayed in the time domain. The
response is
0 .
CALCulate<Ch/Tr>:TRANsform:TIME:STIMulus STEP | IMPulse
Selects the type of stimulus to be simulated in the low pass transformation process.
<Ch/Tr> Channel number used to identify the active trace
Parameters IMPulse – Impulse response, in bandpass or lowpass mode
STEP – Step response, only in lowpass mode (a bandpass mode
setting
CALCulate<Ch/Tr>:TRANsform:TIME[:TYPE] BPASs
is
automatically changed to lowpass)
*RST value IMP
SCPI,
Command
Types Confirmed, command or query
Example:
See CALCulate<Ch/Tr>:TRANsform:TIME[:TYPE]
CALCulate<Ch/Tr>:TRANsform:TIME:STOP <numeric_value>
Defines the stop time of the diagram in time domain.
<Ch/Tr> Channel number used to identify the active trace
<numeric_value>
Stop time of the diagram.
Range [def. unit] –99.999999999998 s to +100 s. The increment (parameters UP
or DOWN) is 0.1 ns. [s]
*RST value +4E-009 s
SCPI, Command
Types Confirmed, command or query
Example:
See CALCulate<Ch/Tr>:TRANsform:TIME:STARt.
Note: If the stop frequency entered is smaller than the current start frequency
(
CALCulate<Ch/Tr>:TRANsform:TIME:STARt
), the start frequency is set to the stop
frequency minus the minimum frequency span
(
CALCulate<Ch/Tr>:TRANsform:TIME:SPAN
).
If the x-axis is scaled in distance units (
CALCulate<Ch/Tr>:TRANsform:TIME:XAXis
DISTance
), then the stop value is entered in m; the range and default value changes
accordingly.
CALCulate<Ch/Tr>:TRANsform:TIME[:TYPE] BPASs | LPASs
Selects the time domain transformation type.