Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 572 / 813

CALCulate R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.110 E-6
SCPI, Command Types Device-specific, command or query.
Example:
See CALCulate<Ch/Tr>:STATistics:SMOothing:APERture
CALCulate<Ch/Tr>:TRANsform...
This subsystem converts measured data from one representation to another and controls the
transformation into the time domain (with option ZVAB-K2,
Time Domain) .
CALCulate<Ch/Tr>:TRANsform:COMPlex S | Y | Z
Converts S-parameters into matched-circuit (converted) Y-parameters or Z-parameters and vice versa,
assuming that port no. i is terminated with Z
0i
so that the three parameter sets are equivalent and the
following formulas apply:
<Ch/Tr> Channel number used to identify the active trace. If unspecified the
numeric suffix is set to 1.
S | Y | P
S-parameters, Y-parameters, Z-parameters
*RST value – (The initial representation of the trace is determined by means of
CALCulate<Ch>:PARameter:SDEFine
)
SCPI,
Command
Types Device-specific, command or query.
Example:
*RST; CALC:PAR:MEAS 'Trc1'", '"Y-S22'
Select the converted admittance Y<–S22 as measurement parameter
of the default trace.
CALC:TRAN:COMP S
Convert the converted Y-parameter into an S-parameter.