Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 611 / 813

R&S
®
ZVA/ZVB/ZVT DISPlay...
1145.1084.12 6.149 E-6
Example:
*RST; DISP:CMAP13:RGB 1,0,0
Create diagram area no. 1 (with default trace showing the S-
parameter S
21
) and color the trace red.
DISP:CMAP:TRAC:COL OFF; DISP:WIND2:STAT ON
Select independent color schemes for new diagram areas. Create a
new diagram area no. 2.
CALC:PAR:SDEF 'TRC2', 'S11'; DISP:WIND2:TRAC2:FEED 'TRC2'
Create a new trace named TRC2 and display the trace in a new
diagram area no. 2. The new trace is red like the first trace.
DISP:CMAP:TRAC:COL ON; DISP:WIND3:STAT ON
Continue the same color scheme in new diagram areas. Create a
new diagram area no. 3.
CALC:PAR:SDEF 'TRC3', 'S22'; DISP:WIND3:TRAC3:FEED 'TRC3'
Create a new trace named TRC3 and display the trace in a new
diagram area no. 3. The new trace is not red.
DISPlay:WINDow<Wnd>:MAXimize <Boolean>
Maximizes all diagram areas in the active setup or restores the previous display configuration.
<Wnd> Number of the diagram area to become the active diagram area.
DISPlay:WINDow<Wnd>:MAXimize
acts on all diagrams of the
current setup, however, the diagram no. <Wnd> is displayed on top of
the others.
<Boolean>
ON | OFF - Maximize all diagram areas or restore the previous display
configuration.
*RST value OFF
SCPI,
Command
Types Device-specific, command or query (returns whether or not the
diagrams are maximized).
Example:
*RST; DISP:WIND2:STAT ON
Create diagram areas no. 1 (with default trace) and 2 (with no trace).
DISP:WIND2:MAXimize ON
Maximize the diagram areas, placing area no. 2 on top.
DISPlay:WINDow<Wnd>:STATe <Boolean>
Creates or deletes a diagram area, identified by its area number <Wnd>.
<Wnd> Number of the diagram area to be created or deleted.
<Boolean>
ON | OFF - Creates or deletes diagram area no. <Wnd>.
*RST value –