Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 709 / 813

R&S
®
ZVA/ZVB/ZVT SENSe
1145.1084.12 6.247 E-6
*RST value –
SCPI, Command
Types Device specific, query only.
Example:
SEGM:INS 1MHZ, 1.5MHZ, 111, -21DBM, 0.5S, 0, 10KHZ
Create a sweep segment with a sweep range between 1.0 MHz
and 1.5 MHz.
SEGM:FREQ:SPAN?
Query the span of the created segment. The response is
5.0000005.
Note: The frequency range of the sweep segment can be changed via
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:STARt and
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:STOP
.
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:STARt <numeric_value>
Defines the Start frequency of sweep segment no. <Seg>.
<Ch> Channel number.
<Seg> Sweep segment number.
<numeric_value> Start frequency of the sweep.
Range [def. unit] Depending on the instrument model [Hz]. The increment is 0.1
kHz.
*RST value – (no sweep segment defined after reset)
SCPI, Command
Types Device-specific, command or query
Example:
SEGM:INS 1MHZ, 1.5MHZ, 111, -21DBM, 0.5S, 0, 10KHZ
Create a sweep segment with a sweep range between 1.0 MHz
and 1.5 MHz.
SEGM:FREQ:STAR?
Query the start frequency of the created segment. The
response is 1.0000006.
Note: If the start frequency entered is greater than the current stop frequency
([SENSe<Ch>:]SEGMent<Seg>:FREQuency:STOP), the stop frequency is set to the start
frequency plus the minimum frequency span of 1 Hz.
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:STOP <numeric_value>
Defines the Stop frequency of sweep segment no. <Seg>.
<Ch> Channel number.
<Seg> Sweep segment number.
<numeric_value> Stop frequency of the sweep.
Range [def. unit] Depending on the instrument model [Hz]. The increment is 0.1
kHz.
*RST value – (no sweep segment defined after reset)