Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 208 / 813

Trace Menu R&S
®
ZVA/ZVB/ZVT
1145.1084.12 4.46 E-6
To create a new trace in a new channel, use the Channel – Channel Select – New Channel
function.
Remote
control:
CALCulate<Ch>:PARameter:SDEFine <Trace Name>, < Meas
Parameter>
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED
Add Trace + Diag. Area
Creates a new trace in a new diagram area and assigns the trace to the current channel. The new trace
is created with the trace and channel settings of the former active trace but displayed with another
color.
The new trace is named Trc <n>, where <n> is the largest of all existing trace numbers plus one. The
name can be changed in the Trace Manager .
Remote
control:
CALCulate<Ch>:PARameter:SDEFine <Trace Name>, < Meas
Parameter>
DISPlay:WINDow<Wnd>:STATe ON
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED
Delete Trace
Deletes the current trace and removes it from the diagram area. Delete Trace is disabled if the setup
contains only one trace: In manual control, each setup must contain at least one diagram area with one
channel and one trace
.
To restore a trace that was unintentionally deleted, use the Undo function.
Remote control:
CALCulate<Ch>:PARameter:DELete <Trace Name>
Assign Channel
Assigns the active trace to another channel . A popup window offers a list of all channels available:
•
Selecting one of the existing channel names assigns the current trace to the existing channel.
•
Selecting New creates a new channel and assigns the current trace to the new channel. The
new channel is named Ch <n>, where <n> is the largest of all existing channel numbers plus
one. The name can be changed in the Channel Manager.