Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 652 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.190 E-6
Example:
See [SENSe<Ch>:]CORRection:COLLect:SAVE:SELected:DEFault.
The different calibration types of the analyzer provide the following error terms:
Calibration
type Parameters in
[SENSe<Ch>:]CORRection:COLLect:METHod:DEFin
e Available error
terms
(depending on
port numbers)
One-port
normalizatio
n (reflection)
using an
open or a
short
standard REFL, RSHort 'REFLTRACK'
Full one port FOPort 'DIRECTIVITY',
'SRCMATCH',
'REFLTRACK'
Two-port
normalizatio
n FRTRans 'TRANSTRACK'
One path
two port OPTPort 'DIRECTIVITY',
'SRCMATCH',
'REFLTRACK',
'TRANSTRACK'
TOSM TOSM 'DIRECTIVITY',
'SRCMATCH',
'REFLTRACK',
'LOADMATCH',
'TRANSTRACK'
(at present the
'ISOLATION'
terms are not
included)
TOM, TRM,
TRL, TNA,
Enhanced
TOM,
Enhanced
TSM TOM | TRM | TRL | TNA | ETOM | ETSM 'DIRECTIVITY',
'SRCMATCH',
'REFLTRACK',
'LOADMATCH',
'TRANSTRACK'
(for reading and
writing)
'G11' ... 'G22'
and 'H11',
'H12', 'H22' (for
reading only;
the 'H21' matrix
elements are
normalized to
1)
[SENSe<Ch>:]CORRection:CKIT...
This subsystem controls system error correction and recording of correction data.
[SENSe<Ch>:]CORRection:CKIT:<std_type>
'<Conn_Name>','<Ckit_Name>','<Std_No>',<Min_Freq>,<Max_Freq>,<El_Length
>,<Loss>,<Z0>,<C0> , <C1>, <C2>, <C3>, <L0>, <L1>, <L2>, <L3>[, OPEN |
SHORt | MATCh, <Resistance>]
Defines the parameters of a non-ideal 1 port or 2-port calibration standard <std_type>. A particular
physical standard can be selected by specifying the name of the calibration kit and its serial number.