Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 538 / 813

CALCulate R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.76 E-6
Example:
CALC:LIM:UPP:FEED 1 GHZ, 10
Use the stimulus values of the active trace, shifted by 1 GHz to
the right and increased by 10 dB, to create an upper limit line.
CALC:LIM:UPP:SHIF 3; CALC:LIM:CONT:SHIF 1 GHz
Shift the limit line by an additional 3 dB in vertical and by 1 GHz
in horizontal direction. If a lower limit line exists it is also shifted.
CALCulate<Ch/Tr>:LIMit:UPPer:SHIFt <numeric_value>
Shifts all lower and upper limit line segments assigned to the active trace in vertical direction.
This command is identical with
CALCulate<Ch/Tr>:LIMit:LOWer:SHIFt
.
<Ch/Tr>
Channel number used to identify the active trace.
<numeric_value> Response offset value for all limit line segments.
Range [def. unit] Almost no restriction for limit segments; see Rules for Limit Line
Definition. [dB]
*RST value –
SCPI, Command
Types
Device-specific, no query.
Example:
See CALCulate<Ch/Tr>:LIMit:UPPer:FEED.
CALCulate<Ch/Tr>:LIMit:UPPer:STATe <Boolean>
Switches the upper limit check on or off. Upper limit line segments are assigned odd numbers; see
CALCulate<Ch/Tr>:LIMit:UPPer[:DATA]
. The command does not affect segments with even
numbers.