Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 627 / 813

R&S
®
ZVA/ZVB/ZVT MEMory...
1145.1084.12 6.165 E-6
INSTrument[:SELect] CHANNEL1 | CHANNEL2 | CHANNEL3 | CHANNEL4
Selects a channel <Ch> as active channel.
To select a channel number > 4 use the generalized command
INSTrument:NSELect <Ch>
.
Parameters Number of the channel to be activated. The channel must be created
before using
CONFigure:CHANnel<Ch>:STATe ON
.
Range [def.
unit]
CHANNEL1, CHANNEL2, CHANNEL3, CHANNEL4 [–]
*RST value CHANNEL1
SCPI,
Command
Types Confirmed, command or query. If all channels have been deleted
(
CONFigure:CHANnel<Ch>:STATe OFF)
the query returns
CHANNEL0.
Example:
CONF:CHAN2:STAT ON; INST CHANNEL2
Create channel no. 2 and select it as the active
channel.
MEMory...
The MEMory system controls the loaded setups of the analyzer.
The MEMory... command don't affect any stored files. Use the MEMory... commands to store and
load data and to manage files stored on a mass storage device.
MEMory:CATalog?
Returns the names of all loaded setups.
Response Comma-separated list of all setups.
*RST value 'Set1' (the default setup is created after each *RST).
SCPI,
Command
Types
Confirmed (with device-specific response), query only.
Example:
*RST; MEM:DEF 'SETUP_2'
Create a setup named 'Setup_2' and make it the
active setup.
MEM:CAT?
Query all setups. The response is 'Set1,Setup_2'.
M
MEM:STOR:STAT 1,
'C:\Rohde&Schwarz\NWA\RecallSets\Setup_2.zvx'; MEM:DEL
'Setup_2.zvx'
Store the active setup Setup_2 to a file, renaming it Setup_2.zvx
.
Close the setup.