Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 717 / 813

R&S
®
ZVA/ZVB/ZVT SENSe
1145.1084.12 6.255 E-6
SCPI, Command
Types Device-specific, command or query
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using default
settings and thus –10 dBm internal source power.
SEGM:SWE:TIME 0.1
Increase the segment sweep time to 0.1 s.
[SENSe<Ch>:]SEGMent<Seg>:SWEep:TIME:CONTrol <Boolean>
Qualifies whether or not the Segment Sweep Time can be set independently for each sweep segment.
<Ch> Channel number 1.
<Seg> Sweep segment number.
<Boolean> ON: The time can be set independently for each sweep segment.
OFF: The time in all sweep segments is equal to the sweep time for
unsegmented sweeps set via
[SENSe<Ch>:]SWEep:TIME
.
*RST value OFF. The parameter is automatically switched to ON when a segment
sweep time is entered using
[SENSe<Ch>:]SEGMent<Seg>:SWEep:TIME
or if the channel settings
in a sweep segment require a sweep time larger than the unsegmented
sweep time.
SCPI,
Command
Types Device-specific, command or query
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using default
settings and thus –10 dBm internal source power.
SEGM:SWE:TIME 0.1
Increase the segment sweep time to 0.1 s.
SEGM:SWE:TIME:CONT OFF
Couple the sweep times in all segments and reset the sweep time in
segment no. 1 to the initial value.