Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 697 / 813

R&S
®
ZVA/ZVB/ZVT SENSe
1145.1084.12 6.235 E-6
Example:
*RST; CALC:PAR:DEL 'TRC1'
Reset the analyzer and delete the (default) trace
for channel no. 1.
SOUR:LPOR1 1,2
Combine the physical ports no. 1 and 2 to define the balanced (logical)
port no. 1.
LPOR1:ZDIF 27, 2
Specify a complex differential mode reference impedance of 27
Ω
+ j *
2
Ω
for the defined port.
[SENSe<Ch/Tr>:]PAE...
This subsystem configures the measurement of the Power Added Efficiency (PAE).
[SENSe<Ch/Tr>:]PAE:C <numeric_value>
Defines the constant c for the PAE measurement.
<Ch/Tr> Channel number used to identify the active trace.
<numeric_value> Value of the constant c in the PAE test model
(
[SENSe<Ch/Tr>:]PAE:EXPRession
). The value is used if one
of the test models
C10 | C1 | CK11
is selected.
Range [def. unit] -3.4028038 W/V to +3.4028038 W/V [W/V].
*RST value 0 W/V
SCPI, Command
Types Device-specific, command or query
Example:
*RST; CALC:PAR:MEAS "TRC1", "PAE21"
Select the PAE as a measurement parameter for the default trace
Trc1 . Select port 1 as the DUT input port, port 2 as the DUT output
port.
PAE:EXPR CK11
Select the test model involving both constants and no power
approximation.
PAE:C 10; K 1
Set the constant c = U
DC
/ R to 10 W/V and the constant k = 1
W/V
2
. If the test setup is in accordance with the settings made, the
trace shows the PAE for a constant DC supply voltage U
DC
.