Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 703 / 813

R&S
®
ZVA/ZVB/ZVT SENSe
1145.1084.12 6.241 E-6
[SENSe<Ch>:]SEGMent<Seg>:BWIDth[:RESolution]:CONTrol <Boolean>
Qualifies whether or not the Meas. Bandwidth can be set independently for each sweep segment.
<Ch> Channel number 1.
<Seg> Sweep segment number.
<Boolean> ON: The bandwidth can be set independently for each sweep segment.
OFF: The bandwidth in all sweep segments is equal to the bandwidth for
unsegmented sweeps set via
SENSe<Ch>:BWIDth[:RESolution]
.
*RST value OFF. The parameter is automatically switched to ON when a bandwidth
is entered using
[SENSe<Ch>:]SEGMent<Seg>:BWIDth[:RESolution]
.
SCPI,
Command
Types Device-specific, command or query
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using default
settings and thus 10 kHz measurement bandwidth.
SEGM:BWID 1 MHZ
Increase the resolution bandwidth to 1 MHz.
SEGM:BWID:CONT OFF
Couple the bandwidths in all segments and reset the bandwidth in
segment no. 1 to the initial value.
[SENSe<Ch>:]SEGMent<Seg>:BWIDth[:RESolution]:SELect NORMal | HIGH
Defines the Selectivity in sweep segment no. <Seg>. At the same time, the command activates
separate selectivity setting in all sweep segments
(
[SENSe<Ch>:]SEGMent<Seg>:BWIDth[:RESolution]:CONTrol:SELect ON
).
<Ch>
Channel number 1.