Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 616 / 813

DISPlay... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.154 E-6
DISPlay:WINDow<Wnd>:TRACe<WndTr>:Y[:SCALe]:PDIVision
<numeric_value>
Sets the value between two grid graticules (value “per division”) for a particular displayed trace. When a
new PDIVision value is entered, the current RLEVel is kept the same, while the top and bottom scaling
is adjusted for the new PDIVision value.
<Wnd> Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr> Existing trace number, assigned by means of
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED
.
<numeric_value> Value and unit for the vertical diagram divisions.
Range [def. unit]
Range and unit depend on the measured quantity, see Units for
DISPlay... Commands .
*RST value Depending on the measured quantity. The default reference level
for an S-parameter displayed in a
dB Mag diagram is 10 dB.
SCPI, Command
Types Confirmed, with query.
Example:
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the input
reflection coefficient S11.
DISP:WIND2:STAT ON
Create diagram area no. 2.
DISP:WIND2:TRAC9:FEED 'CH4TR1'
Display the generated trace in diagram area no. 2, assigning the
trace number 9 to it.
DISP:WIND2:TRAC9:Y:RLEV -10
Change the reference level to –10 dB.
DISPlay:WINDow<Wnd>:TRACe<WndTr>:Y[:SCALe]:RLEVel <numeric_value>
Sets the reference level (or reference value) for a particular displayed trace. Setting a new reference
level does not affect the value of PDIVision.
<Wnd>
Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr> Existing trace number, assigned by means of
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED
.
<numeric_value> Value and unit for the reference level (or reference value, if the
trace does not show a level).
Range [def. unit]
Range and unit depend on the measured quantity, see Units for
DISPlay... Commands .
*RST value Depending on the measured quantity. The default reference level
for an S-parameter displayed in a
dB Mag diagram is 0 dB.
SCPI, Command Confirmed, with query.