Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 718 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.256 E-6
[SENSe<Ch>:]SEGMent<Seg>:SWEep:DWELl <numeric_value>
Defines the delay time for each partial measurement in sweep segment no. <Seg> (Meas. Delay ). If
coupling of the segments is switched on (
[SENSe<Ch>:]SEGMent<Seg>:SWEep:DWELl:CONTrol
ON
) the delay is valid for all sweep segments in the current channel.
<Ch> Channel number.
<Seg> Sweep segment number.
<numeric_value> Meas. delay before each partial measurement.
Range [def. unit] 0 s to 2.5E+003 s. [s] Changing the delay leaves the number of
points unchanged but has an impact on the duration of the sweep
([SENSe<Ch>:]SEGMent<Seg>:SWEep:TIME).
*RST value 0 s
SCPI, Command
Types Device-specific, command or query. This default value
corresponds to automatic sweep time setting in manual control.
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using default
settings.
SEGM:SWE:DWEL 1 MS
Set the meas. delay in segment no. 1 to 1 ms.
SEGM:DEF? Response: 300000,8000000000,51,-
300,0.056559,0,10000,POS,NORM
Query the channel parameters for sweep segment 1. The
response value for the segment sweep time (olive) implicitly
contains the defined meas. delay.
[SENSe<Ch>:]SEGMent<Seg>:SWEep:DWELl:CONTrol <Boolean>
Qualifies whether or not the Meas. Delay defined via
[SENSe<Ch>:]SEGMent<Seg>:SWEep:DWELl
can be set independently for each sweep segment.
<Ch> Channel number.
<Seg> Sweep segment number.
<Boolean> ON: The meas. delay can be set independently for each sweep
segment.
OFF: The meas. delay in all sweep segments is equal to the
Meas.
Delay measurements for unsegmented sweeps set via
[SENSe<Ch>:]SWEep:DWELl
.
*RST value OFF. The parameter is automatically switched to ON when a meas.
delay time is entered using
[SENSe<Ch>:]SEGMent<Seg>:SWEep:DWELl
.
SCPI,
Command
Types Device-specific, command or query.