Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 119 / 813

R&S
®
ZVA/ZVB/ZVT Screen Elements
1145.1084.12 3.9 E-1
Navigation softkey (optional)
Softkey no. 8 or softkeys no. 7 and no. 8 are reserved for navigation:
•
More 1/2 and More 2/2 toggle between two groups of softkeys which
belong to the same menu. The softkeys are provided whenever the
active menu contains more than 7 commands.
•
Menu Up activates the higher-level menu and is provided in all menus
except the top-level one listing the main menus in the menu bar.
The softkey bar is automatically updated when the active menu is changed.
You can hide the softkey bar and gain screen space for the diagram areas if you use a mouse to
control the analyzer (see Diplay – Config./View ). All settings are accessible from the menus listed in the
menu bar across the top of the screen. Moreover, you don't have to display the softkey bar permanently
in order to make use of its functionality. Hitting any of the keys associated to the softkey bar will make it
visible for a period of time sufficient to select the next instrument function.
Hardkey Bar
The hardkey bar (front panel key bar, Diplay – Config./View) represents the most commonly used front
panel keys of the analyzer. Clicking a key symbol executes the action of the corresponding key.
The hardkey bar corresponds to the TRACE, CHANNEL, DISPLAY and SYSTEM keypads:
The hardkey bar provides access to the basic groups of settings with a single mouse click. It is
particularly useful if the analyzer is controlled from an external monitor or Remote Desktop . Alternatively
the settings are accessible from the menus of the menu bar or from the softkey bar.
The hardkey bar is hidden by default to gain screen space for the diagram areas.
Status Bar
The status bar ( Diplay – Config./View) describes the current channel (if the setup contains only one
channel), the progress of the sweep and the control mode of the analyzer (LOCAL or REMOTE) .
During sweep initialization, the progress bar for the sweep is replaced by a symbol.
During the first sweep after a change of the channel settings, an additional red asterisk symbol
appears:
You can hide the status bar and gain screen space for the diagram areas.