manualshive.com logo in svg

Nortel 425-24T, Руководство по настройке, Страница: 4 / 488

Поделиться
Скачать
Nortel 425-24T Скачать руководство пользователя страница 4

4

320985-A Rev 01

 

Government, the respective rights to the software and software documentation are governed by Nortel 

Networks standard commercial license in accordance with U.S. Federal Regulations at 48 C.F.R. Sections 
12.212 (for non-DoD entities) and 48 C.F.R. 227.7202 (for DoD entities).

b.

Customer may terminate the license at any time. Nortel Networks may terminate the license if Customer fails 

to comply with the terms and conditions of this license. In either event, upon termination, Customer must 
either return the Software to Nortel Networks or certify its destruction.

c.

Customer is responsible for payment of any taxes, including personal property taxes, resulting from 
Customer’s use of the Software. Customer agrees to comply with all applicable laws including all applicable 
export and import laws and regulations.

d.

Neither party may bring an action, regardless of form, more than two years after the cause of the action arose.

e.

The terms and conditions of this License Agreement form the complete and exclusive agreement between 
Customer and Nortel Networks.

f.

This License Agreement is governed by the laws of the country in which Customer acquires the Software. If 
the Software is acquired in the United States, then this License Agreement is governed by the laws of the state 
of New York.

Содержание 425-24T









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов