Dell Networking Z9500, Справочник по командам

Страница: 931 / 1905

Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.19.0 Introduced on the S4820T.
Usage
Information To clear Layer 3 CAM inconsistencies, use this command.
CAUTION: Executing this command causes traffic disruption.
Related
Commands show ip fib linecard — shows FIB entries on a specified stack-unit.
clear ip route
Clear one or all routes in the routing table.
Z9500
Syntax
clear ip route {* | ip-address mask }
Parameters
* Enter an asterisk (*) to clear all learned IP routes.
ip-address
mask Enter a specific IP address and mask in dotted decimal
format to clear that IP address from the routing table.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
IPv4 Routing
931