Dell Networking Z9500, Справочник по командам

Страница: 711 / 1905

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
host
For manual (rather than automatic) configurations, assign a host to a single-address pool.
Z9500
Syntax
host address
Parameters
address/mask Enter the host IP address and subnet mask.
Defaults none
Command
Modes DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
ip address dhcp
Configure an interface to receive its IP address from the configured DHCP server.
Z9500
Syntax
ip address dhcp
To release the IP address acquired from a DHCP server, enter the
no ip address
dhcp
command.
Dynamic Host Configuration Protocol (DHCP)
711