Dell Networking Z9500, Справочник по командам

Страница: 557 / 1905

To remove a weight value, use the
no neighbor { ipv6-address | peer-
group-name } weight weight
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name Enter the name of the peer group to disable all routers within
the peer group.
weight Enter a number as the weight. The range is 0 to 65535. The
default is
0 .
Defaults 0
Command
Modes ROUTER BGP
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information In the software’s best path selection process, the path with the highest weight
value is preferred.
NOTE: Reset the neighbor connection (the
clear ip bgp *
command) to
apply the weight to the connection and recompute the best path.
neighbor X:X:X::X password
Enable TCP MD5 Authentication for an IPv6 BGP peer session.
Z9500
Syntax
neighbor x:x:x::x password {7 <encrypt-pass>|<clear-pass>
To return to the default setting, use the
no neighbor x:x:x::x password
command.
Parameters
encrypt-pass Enter the encrypted password.
clear-pass Enter the clear text password.
Defaults Disabled.
Command
Modes ROUTER BGPV6-ADDRESS FAMILY
Border Gateway Protocol
557