Dell Networking Z9500, Справочник по командам

Страница: 1715 / 1905

snmp-server engineID
Configure the name for both the local and remote SNMP engines on the router.
Z9500
Syntax
snmp-server engineID [local engineID ] [remote ip-address udp-
port port-number engineID ]
To return to the default, use the
no snmp-server engineID [local
engineID ] [remote ip-address udp-port port-number engineID ]
command.
Parameters
local engineID
Enter the keyword
local
followed by the engine ID number
that identifies the copy of the SNMP on the local device.
Format (as specified in RFC 3411): 12 octets.
• The first four octets are set to the private enterprise
number.
• The remaining eight octets are the MAC address of the
chassis.
remote ip-
address
Enter the keyword
remote
followed by the IP address that
identifies the copy of the SNMP on the remote device.
udp-port port-
number
engineID
Enter the keywords
udp-port
followed by the user
datagram protocol (UDP) port number on the remote device.
The range is from 0 to 65535. The default is
162 .
Defaults As above.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog
1715