Dell Networking Z9500, Справочник по командам

Страница: 180 / 1905

system location-led
Toggle the location LED of the chassis and (optionally) the location LED of a specified Z9500 port on or
off.
Syntax
system location-led [interface {fortyGigE | tengigabitethernet}
slot / port ] {on | off}
Parameters
interface
{fortyGigE |
tengigabitether
net} Specify the port type: 40-Gigabit Ethernet or 10-Gigabit
Ethernet.
slot / port Enter the slot and port number. The range of Z9500 slot
numbers is 0 to 2.
on |off Turn the location LEDs of the chassis and a specified port on
or off.
Defaults The location LEDs of the chassis and Z9500 ports are turned off.
Command
Modes EXEC
Command
History
Version 9.2(1.0) Introduced on the Z9500.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Usage
Information Use the
system location-led
command to locate the chassis and (optionally) a
port on the I/O side of the Z9500 chassis. The location LED setting is not saved
through power cycles.
telnet
Connect through Telnet to a server. The Telnet client and server in the Dell Networking OS support IPv4
and IPv6 connections. You can establish a Telnet session directly to the router or a connection can be
initiated from the router.
Z9500
Syntax
telnet { host | ip-address | ipv6-address prefix-length | vrf
vrf instance name } [/source-interface]
Parameters
host Enter the name of a server.
ip-address Enter the IPv4 address in dotted decimal format of the
server.
180
Control and Monitoring