Dell Networking Z9500, Справочник по командам

Страница: 1129 / 1905

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related
Commands show lacp — displays the LACP configuration.
debug lacp
Debug LACP (configuration, events, and so on).
Z9500
Syntax
debug lacp [config | events | pdu [ interface-type [in | out]]]
To disable LACP debugging, use the
no [config | events | pdu
[ interface-type [in | out]]]
command.
Parameters
config (OPTIONAL) Enter the keyword
config
to debug the LACP
configuration.
events (OPTIONAL) Enter the keyword
events
to debug the LACP
event information.
pdu (OPTIONAL) Enter the keyword
pdu
to debug the LACP
Protocol Data Unit information.
interface-type
in | out
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
Optionally, enter an
in
or
out
parameter:
• Receive enter
in
• Transmit enter
out
Defaults none
Link Aggregation Control Protocol (LACP)
1129