Dell Networking Z9500, Справочник по командам

Страница: 265 / 1905

vlanaclopt
<0-2> Allocate a number of FP blocks of CAM for CAM optimization
of ACL VLAN operation.
Default To reset the number FP blocks allocated for ACL VLAN processes, enter the
default
keyword with the
cam-acl-vlan
command. By default, 0 FP blocks are
allocated for ACL VLAN operations on the switch.
Command
Modes ACL-VLAN-GROUP CONFIGURATION
Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810 and Z9000.
Usage
Information The VLAN ContentAware Processor (VCAP) application is a pre-ingress CAP that
modifies the VLAN settings before packets are forwarded. To support the ACL CAM
optimization functionality, the CAM carving feature is enhanced. A total of four
VACP groups are present, of which two are for fixed groups and the other two are
for dynamic groups. Out of the total of two dynamic groups, you can allocate zero,
one, or two flow processor (FP) blocks to iSCSI counters, Open Flow and ACL
VLAN optimization. You can configure CAM FP blocks for only two of these ACL
VLAN services at a time.
description (ACL VLAN Group)
Add a text description of an ACL VLAN group.
Syntax
description text
Parameters
description Enter a text to identify the ACL VLAN group (80 characters
maximum).
Default No default behavior or values
Command
Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Command
History
Version Description
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, and Z9000.
Usage
Information Enter a description for each ACL VLAN group that you create for effective
administrative and logging purposes.
Access Control Lists (ACL)
265