Dell Networking Z9500, Справочник по командам

Страница: 1280 / 1905

Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
9.1(0.0) Included usage information on maximum number of digest
keys per interface.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
You can configure a maximum of six digest keys on an interface. Of the available
six digest keys, the switches select the MD5 key that is common. The remaining
MD5 keys are unused.
To change to a different key on the interface, enable the new key while the old key
is still enabled. The system sends two packets: the first packet authenticated with
the old key and the second packet authenticated with the new key. This process
ensures that the neighbors learn the new key and communication is not disrupted
by keeping the old key enabled.
After the reply is received and the new key is authenticated, delete the old key. Dell
recommends keeping only one key per interface.
NOTE: The MD5 secret is stored as plain text in the configuration file with
service password encryption. Write down or otherwise record the key. You
cannot learn the key once it is configured. Use caution when changing the
key.
ip ospf mtu-ignore
Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
Z9500
Syntax
ip ospf mtu-ignore
To return to the default, use the
no ip ospf mtu-ignore
command.
1280
Open Shortest Path First (OSPFv2 and OSPFv3)