Dell Networking Z9500, Справочник по командам

Страница: 1788 / 1905

clock timezone
Configure a timezone for the switch.
Z9500
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the
no clock timezone
command.
Parameters
timezone-
name Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition
to universal time coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the
number of hours.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information Coordinated universal time (UTC) is the time standard based on the International
Atomic Time standard, commonly known as Greenwich Mean time. When
determining system time, include the differentiator between UTC and your local
timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of
-8.
1788
System Time and Date