Dell Networking Z9500, Справочник по командам

Страница: 508 / 1905

Version Description
7.4.1.0 Introduced
Usage
Information
The software compares the MEDs only if the path contains no external
autonomous system numbers.
If you enable this command, use the
clear ip bgp *
command to recompute
the best path.
bgp bestpath med missing-as-best
During path selection, indicate preference to paths with missing MED (MULTI_EXIT_DISC) over those
paths with an advertised MED attribute.
Z9500
Syntax
bgp bestpath med missing-as-best
To return to the default selection, use the
no bgp bestpath med missing-as-
best
command.
Defaults Disabled
Command
Modes ROUTER BGP
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information The MED is a 4-byte unsigned integer value and the default behavior is to assume a
missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During the path selection, paths with a lower MED are preferred over those
with a higher MED.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
Z9500
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the
no bgp client-to-client
reflection
command.
508
Border Gateway Protocol