Dell Networking Z9500, Справочник по командам

Страница: 727 / 1905

ip ip-address Enter the keyword
ip
then the IP address that the server is
leasing.
interface type Enter the keyword
interface
then the type of interface to
which the host is connected:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword
lease
then the amount of time the IP
address are leased. The range is from 1 to 4294967295.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands show ip dhcp snooping — displays the contents of the DHCP binding table.
IPv6 DHCP Snooping Binding
Create a static DHCP snooping binding entry in the snooping database.
Syntax
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
ipv6 ipv6-address interface interface-type | interface-number
lease value
To delete the DHCP snooping binding entry from DHCP snooping database, use
the
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
Dynamic Host Configuration Protocol (DHCP)
727