Dell Networking Z9500, Справочник по командам

Страница: 574 / 1905

show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
Z9500
Syntax
show ip bgp ipv6 unicast neighbors [ ipv6-address prefix-length
| ip-address ] [advertised-routes | dampened-routes | detail |
flap-statistics | routes]
Parameters
ipv6-address
prefix-length |
ip-address Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros or enter an IP address in dotted decimal
format to reset all prefixes from that neighbor.
advertised-
routes (OPTIONAL) Enter the keywords
advertised-routes
to
view only the routes the neighbor sent.
dampened-
routes (OPTIONAL) Enter the keywords
dampened-routes
to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword
detail
to view neighbor-
specific internal information for the IPv6 address family.
flap-statistics (OPTIONAL) Enter the keywords
flap-statistics
to view
flap statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword
routes
to view only the
neighbor’s feasible routes.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Related
Commands show ip bgp – view the current BGP routing table.
574
Border Gateway Protocol