Dell Networking Z9500, Справочник по командам

Страница: 640 / 1905

Example
dcb-policy buffer-threshold linecard all portset all backplane
all test
dcb-policy buffer-threshold linecard all backplane all
Assign the DCB buffer configuration on the backplane ports. This setting takes precedence over the
global buffer-threshold setting.
Syntax
[no] dcb-policy buffer-threshold linecard <0-2>|all [port-set
<0-3/all>] backplane all
<dcb-policy-name>
Parameters
buffer-
threshold
Configure the profile name for the DCB buffer threshold
linecard
Enter the keyword linecard unit identification.
backplane all
Enter the keywords backplane all to assign DCB policy to the
backplane ports.
Defaults None.
Command
Modes GLOBAL CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
Usage
Information
You can configure the DCB buffer configuration on the backplane ports.
show qos dcb-buffer-threshold
Displays the DCB buffer threshold assigned to a QoS policy.
Syntax
show qos dcb buffer-threshold { name }
640
Data Center Bridging (DCB)