Dell Networking Z9500, Справочник по командам

Страница: 608 / 1905

Usage
Information If you do not use the
statistics
parameter, both hardware and DCBx counters
clear.
clear pfc counters sfm backplane all
Clear the PFC counters on sfm and backplane ports.
Syntax
clear pfc counters sfm <0-5/all> backplane all
Parameters
backplane all Enter the keywords all backplane all to clear the counters on
all interfaces.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
Usage
Information
If you do not use the statistics parameter, both hardware and DCBx counters clear.
pfc no-drop queues
Configure the port queues that still function as no-drop queues for lossless traffic.
Syntax
pfc no-drop queues queue-range
To remove the no-drop port queues, use the
no pfc no-drop queues
command.
Parameters
queue-range Enter the queue range. Separate the queue values with a
comma; specify a priority range with a dash; for example,
pfc no-drop queues 1,3
or
pfc no-drop queues 7
or
pfc no-drop queues 0,7
. The range is from 0 to 3.
Defaults No lossless queues are configured.
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
608
Data Center Bridging (DCB)