Dell Networking Z9500, Справочник по командам

Страница: 391 / 1905

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information After you enter this command, the software deletes the history routes and returns
the suppressed routes to the Active state.
The
clear ip bgp dampening
command does not clear the history paths.
clear ip bgp flap-statistics
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Z9500
Syntax
clear ip bgp [vrf vrf-name ] [ipv4 [multicast | unicast] | ipv6
unicast] [flap-statistics [ ipv4-address mask | ipv6–address
mask] | filter-list as-path-name | regexp regular-expression ]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
and then the name of
the VRF to clear BGP flap statistics corresponding to that
VRF.
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
ipv4 multicast (OPTIONAL) Enter the keyword
ipv4
followed by the
keyword
multicast
to clear information related only to
ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword
ipv4
followed by the
keyword
unicast
to clear information related only to ipv4
unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword
ipv6
followed by the
keyword
unicast
to clear information related only to ipv6
unicast routes.
ipv4-address
mask (OPTIONAL) Enter an IPv4 address in dotted decimal format
and the prefix mask in slash format (/x) to reset only that
prefix.
ipv6–address
mask (OPTIONAL) Enter the IPv6 address followed by the network
mask to reset only that prefix.
Border Gateway Protocol
391