Dell Networking Z9500, Справочник по командам

Страница: 343 / 1905

Defaults None
Command
Modes CONFIGURATION-UDF TCAM
Example
Dell(conf-udf-tcam)# udf-qualifier-value ipnip_val1
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S6000, Z9500.
Related
Commands
udf-id — assigns value for each configured UDF ID in the given UDF TCAM profile.
udf-tcam — creates a context for UDF TCAM.
show config — displays the current UDF-Qualifier-Value Profile configuration.
udf-tcam
Create a context for UDF TCAM.
Syntax
udf-tcam name seq number
To return to the default settings, use the
no udf-tcam name seq number
command.
Parameters
name Enter the UDF ACL profile name, up to 64 characters.
number Enter the keyword
seq
then the sequence number of the
Udf-Tcam table. The range is from 1 to 512.
Defaults None
Command
Modes CONFIGURATION
Example
Dell(conf)#udf-tcam ipnip seq 1
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Access Control Lists (ACL)
343