Dell Networking Z9500, Справочник по командам

Страница: 1219 / 1905

debug ip msdp
Turn on MSDP debugging.
Z9500
Syntax
debug ip msdp {event peer address | packet peer address | pim}
To turn debugging off, use the
no debug ip msdp {event peer address |
packet peer address | pim}
command.
Parameters
event peer
address
Enter the keyword
event
then the peer address in a dotted
decimal format (A.B.C.D.).
packet peer
address
Enter the keyword
packet
then the peer address in a dotted
decimal format (A.B.C.D.).
pim Enter the keyword
pim
to debug advertisement from PIM.
Defaults Not configured.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced
ip msdp cache-rejected-sa
Enable an MSDP cache for the rejected source-active entries.
Z9500
Syntax
ip msdp cache-rejected-sa { number }
Multicast Source Discovery Protocol (MSDP)
1219