Dell Networking Z9500, Справочник по командам

Страница: 196 / 1905

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.2.1 Introduced on the C-Series and S-Series.
Usage
Information
The prerequisites for enabling MAB-only authentication on a port are:
• Enable 802.1X authentication globally on the switch and on the port (the
dot1x
authentication
command).
• Enable MAC authentication bypass on the port (the
dot1x mac-auth-bypass
command).
In MAB-only authentication mode, a port authenticates using the host MAC
address even though 802.1xauthentication is enabled. If the MAB-only
authentication fails, the host is placed in the guest VLAN (if configured).
To disable MAB-only authentication on a port, enter the
no dot1x auth-type
mab-only
command.
Related
Commands dot1x mac-auth-bypass
dot1x authentication (Configuration)
Enable dot1x globally. Enable dot1x both globally and at the interface level.
Z9500
Syntax
dot1x authentication
To disable dot1x on a globally, use the
no dot1x authentication
command.
Defaults Disabled
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
196
802.1X