Dell Networking Z9500, Справочник по командам

Страница: 1694 / 1905

Defaults Disabled.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced S-Series Stacking.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage
Information sFlow is disabled by default. In addition to this command, sFlow needs to be enable
on individual interfaces where sFlow sampling is desired.
Related
Commands sflow enable (Interface) — enables sFlow on interfaces.
sflow enable (Interface)
Enable sFlow on interfaces.
Z9500
Syntax
sflow enable
To disable sFlow, use the
no sflow enable
command.
Defaults Disabled.
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
1694
sFlow