Dell Networking Z9500, Справочник по командам

Страница: 498 / 1905

Usage
Information
If the set community
rt
and
soo
are in the same route-map entry, the behavior
defines as:
• If the
rt
option comes before
soo
, with or without the
additive
option,
soo
overrides the communities
rt
sets.
• If the
rt
option comes after
soo
, without the
additive
option,
rt
overrides
the communities
soo
sets.
• If the
rt
with the
additive
option comes after
soo
,
rt
adds the communities
soo
sets.
Related
Commands set extcommunity soo — sets the extended community site-of-origin in the route-
map.
set extcommunity soo
To set extended community site-of-origin in Route Map, use this feature.
Z9500
Syntax
set extcommunity soo {as4 ASN4:NN | ASN:NNNN | IPADDR:NN [non-
trans]}
To delete the site-of-origin community, use the
no set extcommunity
command.
Parameters
as4 ASN4:NN Enter the keyword
as4
then the 4-octet AS specific
extended community number in the format ASN4:NN (4-
byte AS number:2-byte community value).
ASN:NNNN Enter the 2-octet AS specific extended community number
in the format ASN:NNNN (2-byte AS number:4-byte
community value).
IPADDR:NN Enter the IP address specific extended community in the
format IPADDR:NN (4-byte IPv4 Unicast Address:2-byte
community value).
non-trans (OPTIONAL) Enter the keywords
non-trans
to indicate a
non-transitive BGP extended community.
Defaults none
Command
Modes ROUTE MAP (config-route-map)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
498
Border Gateway Protocol