Dell Networking Z9500, Справочник по командам

Страница: 794 / 1905

Version Description
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands show gvrp statistics — displays the GVRP statistics.
debug gvrp
Enable debugging on GVRP.
Z9500
Syntax
debug gvrp {config | events | pdu}
To disable debugging, use the
no debug gvrp {config | events | pdu}
command.
Parameters
config Enter the keyword
config
to enable debugging on the
GVRP configuration.
event Enter the keyword
event
to enable debugging on the JOIN/
LEAVE events.
pdu Enter the keyword
pdu
then one of the following Interface
keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
Defaults Disabled.
Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
794
GARP VLAN Registration (GVRP)