Dell Networking Z9500, Справочник по командам

Страница: 463 / 1905

ipv6 unicast (OPTIONAL) Enter the keyword
ipv6
followed by the
keyword
unicast
to view information related only to ipv6
unicast routes.
as-path-name Enter an AS-PATH access list name. The range is 140
characters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the
show ip bgp filter-list hello
command
shown in the following example.
Field Description
Path source
codes Lists the path sources shown to the right of the last AS
number in the Path column:
• i = internal route entry
• a = aggregate route entry
• c = external confederation route entry
• n = network route entry
• r = redistributed route entry
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing
table.
Metric Displays the BGP route’s metric, if assigned.
Border Gateway Protocol
463