Dell Networking Z9500, Справочник по командам

Страница: 561 / 1905

Related
Commands neighbor default-originate – injects the default route.
redistribute ospf
Redistribute OSPFv3 routes into BGP.
Z9500
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match
internal]] [route-map map-name ]
To stop redistribution of OSPF routes, use the
no redistribute ospf
process-id
command.
Parameters
process-id Enter the number of the OSPFv3 process. The range is 1 to
65535.
match external
{1 | 2} (OPTIONAL) Enter the keywords
match external
to
redistribute OSPF external routes. You can specify 1 or 2 to
redistribute those routes only.
match internal (OPTIONAL) Enter the keywords
match internal
to
redistribute OSPFv3 internal routes only.
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
followed by the
name of an established route map. Only the following
ROUTE-MAP mode commands are supported:
• match ipv6 address
• match ipv6 next-hop
• match ipv6 route-source
• set ipv6 next-hop
If you do not configure the route map, the default is
deny
(to
drop all routes).
Defaults Not configured.
Command
Modes ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Border Gateway Protocol
561