Dell Networking Z9500, Справочник по командам

Страница: 407 / 1905

neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI (Address
Family Identifier/Subsequent Address Family Identifier).
Z9500
Syntax
neighbor [ ip-address | peer-group-name ] activate
To disable, use the
no neighbor [ ip-address | peer-group-name ]
activate
command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-
name (OPTIONAL) Enter the name of the peer group.
activate Enter the keyword
activate
to enable the neighbor/peer
group in the new AFI/SAFI.
Defaults Disabled
Command
Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information By default, when you create a neighbor/peer group configuration in the Router
BGP context, this enables IPv4/Unicast AFI/SAFI. When you use
activate
in the
new context, the neighbor/peer group enables for AFI/SAFI.
Border Gateway Protocol
407