Dell Networking Z9500, Справочник по командам

Страница: 1015 / 1905

clear ipv6 mld_host
Clear the IPv6 MLD host counters and reset the elapsed time.
Z9500
Syntax
clear ipv6 mld_host
Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
ipv6 address
Configure an IPv6 address to an interface.
Z9500
Syntax
ipv6 address { ipv6-address prefix-length }
To remove the IPv6 address, use the
no ipv6 address { ipv6-address
prefix-length }
command.
Parameters
ipv6-address
prefix-length Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults none
Command
Modes INTERFACE
IPv6 Basics
1015