Dell Networking Z9500, Справочник по командам

Страница: 1508 / 1905

service-queue
Assign a class map and QoS policy to different queues.
Z9500
Syntax
service-queue queue-id [class-map class-map-name ] [qos-policy
qos-policy-name ]
To remove the queue assignment, use the
no service-queue queue-id
[class-map class-map-name ] [qos-policy qos-policy-name ]
command.
Parameters
queue-id Enter the value used to identify a queue. The range is from 0
to 7 (eight data queues and eight control queues).
class-map
class-map-
name
(OPTIONAL) Enter the keyword
class-map
then the class
map name assigned to the queue in character format (32
character maximum).
NOTE: This option is available under
policy-map-
input
only.
qos-policy
qos-policy-
name
(OPTIONAL) Enter the keywords
qos-policy
then the QoS
policy name assigned to the queue in text format (32
characters maximum). This specifies the input QoS policy
assigned to the queue under
policy-map-input
and
output QoS policy under
policy-map-output
context.
Defaults none
Command
Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
1508
Quality of Service (QoS)