Dell Networking Z9500, Справочник по командам

Страница: 1502 / 1905

Usage
Information
To specify the name of the input QoS policy, use this command. After the input
policy is specified, rate-police is defined. This command enables Qos-Policy-Input
Configuration mode — (conf-qos-policy-in).
When changing a Service-Queue configuration in a QoS policy map, all QoS rules
are deleted and re-added automatically to ensure that the order of the rules is
maintained. As a result, the Matched Packets value shown in the
show qos
statistics
command is reset.
If you create create a QoS input policy to be used for CoPP, you must enter the
keyword
cpu-qos
.
Related
Commands rate police — incoming traffic policing function.
qos-policy-output
Create a QoS output policy.
Z9500
Syntax
qos-policy-output qos-policy-name
To remove an existing output QoS policy, use the
no qos-policy-output qos-
policy-name
command.
Parameters
qos-policy-
name Enter your output QoS policy name in character format (32
characters maximum).
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
1502
Quality of Service (QoS)