Dell Networking Z9500, Справочник по командам

Страница: 455 / 1905

*> 66.0.0.0/24
172.16.0.2 0 200 i
show ip bgp community-list
View routes that a specific community list affects.
Z9500
Syntax
show ip bgp [vrf vrf-name ] [ipv4 { unicast | multicast } | ipv6
unicast ] community-list community-list-name [exact-match]
Parameters
vrf vrf-name (OPTIONAL) Enter the keywords
vrf
and then the name of
the VRF to view routes affected by a specific community list
corresponding to that VRF.
ipv4 unicast (OPTIONAL) Enter the keywords
ipv4 unicast
to view
information only related to ipv4 unicast routes.
ipv4 multicast (OPTIONAL) Enter the keyword
ipv4
followed by the
keyword
multicast
to view information related only to ipv4
multicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword
ipv6
followed by the
keyword
unicast
to view information related only to ipv6
unicast routes.
community-
list-name Enter the name of a configured IP community list (maximum
140 characters).
exact-match Enter the keyword for an exact match of the communities.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Border Gateway Protocol
455