manualshive.com logo in svg

Dell Networking Z9500, Справочник по командам

Поделиться
Скачать
Dell Networking Z9500 Скачать руководство пользователя страница 817

Command 
Modes

INTERFACE

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Changed the default IGMP from version 2 to version 3. 
Introduced on the S6000-ON

9.5(0.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

9.2(0.0)

Introduced on the M I/O Aggregator. This command is 
supported in Programmable-Mux (PMUX) mode only.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the S-Series.

7.7.1.0

Introduced on the C-Series.

7.5.1.0

Introduced on the E-Series.

show ip igmp groups

View the IGMP groups.

Z9500

Syntax

show ip igmp [vrf 

vrf-name

] groups [group-address [detail] | 

detail | 

interface

 [

group-address

 [detail]]]

Parameters

vrf 

vrf-name

(OPTIONAL) Enter the keyword 

vrf

 followed by the name of 

the VRF to configure this setting on that VRF.

group-address

(OPTIONAL) Enter the group address in dotted decimal 
format to view information on that group only.

interface

(OPTIONAL) Enter the interface type and slot/port 
information:

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

• For a Loopback interface, enter the keyword 

loopback 

then a number from 0 to 16383.

Internet Group Management Protocol (IGMP)

817

Содержание Networking Z9500


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды