Dell Networking Z9500, Справочник по командам

Страница: 1631 / 1905

Version Description
6.1.1.0 Introduced on the E-Series.
radius-server host
Configure a RADIUS server host.
Z9500
Syntax
radius-server host { hostname | ipv4-address | ipv6-address }
[auth-port port-number ] [retransmit retries ] [timeout seconds ]
[key [ encryption-type ] key ]
Parameters
hostname Enter the name of the RADIUS server host.
ipv4-address |
ipv6-address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X)
of the RADIUS server host.
auth-port port-
number
(OPTIONAL) Enter the keywords
auth-port
then a number
as the port number. The range is from zero (0) to 65535. The
default port-number is
1812 .
retransmit
retries
(OPTIONAL) Enter the keyword
retransmit
then a number
as the number of attempts. This parameter overwrites the
radius-server retransmit
command. The range is
from zero (0) to 100. The default is 3 attempts .
timeout
seconds
(OPTIONAL) Enter the keyword
timeout
then the seconds
the time interval the switch waits for a reply from the RADIUS
server. This parameter overwrites the
radius-server
timeout
command. The range is from 0 to 1000. The
default is 5 seconds .
key
[
encryption-
type ] key
(OPTIONAL) Enter the keyword
key
then an optional
encryption-type and a string up to 42 characters long as the
authentication key. The RADIUS host server uses this
authentication key and the RADIUS daemon operating on
this switch.
For the encryption-type, enter either zero (
0
) or
7
as the
encryption type for the key entered. The options are:
•
0
is the default and means the password is not encrypted
and stored as clear text.
•
7
means that the password is encrypted and hidden.
Configure this parameter last because leading spaces are
ignored.
Defaults Not configured.
Security
1631