Dell Networking Z9500, Справочник по командам

Страница: 707 / 1905

Last logging buffer cleared: Jan 7 01:41:17
Jan 7 01:42:34: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: DHCP RELEASE sent in Interface Fo 2/0
Jan 7 01:41:39: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: Received DHCPACK packet in InterfaceFo 2/0
with Lease-IP:100.1.1.253, Mask:255.255.255.0, Server-Id:
100.1.1.2
Jan 7 01:41:39: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: DHCP REQUEST sent in Interface Fo 2/0
Jan 7 01:41:36: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: Received DHCPOFFER packet in Interface Fo
2/0 with Lease-Ip:100.1.1.253, Mask:255.255.255.0,Server-Id:
100.1.1.2
Jan 7 01:41:36: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: DHCP DISCOVER sent in Interface Fo 2/0
default-router
Assign a default gateway to clients based on the address pool.
Z9500
Syntax
default-router address [ address2...address8 ]
Parameters
address Enter a list of routers that may be the default gateway for
clients on the subnet. You may specify up to eight routers.
List them in order of preference.
Defaults none
Command
Modes DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Dynamic Host Configuration Protocol (DHCP)
707