Dell Networking Z9500, Справочник по командам

Страница: 1487 / 1905

Defaults none
Command
Modes CONFIGURATION (conf-qos-policy-out)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.1.9.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced on the E-Series.
Usage
Information
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages
given to all eight classes exceeds 100%, the bandwidth percentage automatically
scales down to 100%.
Related
Commands qos-policy-output — creates a QoS output policy.
class-map
Create a class map. Class maps differentiate traffic so that you can apply separate quality-of-service
policies to each class.
Z9500
Syntax
class-map {match-all | match-any} class-map-name [layer2] [cpu-
qos]
Parameters
match-all Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords
match-all
to determine
that the packets must meet all the match criteria in order to
be a member of the class.
match-any Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords
match-any
to determine
that the packets must meet at least one of the match criteria
in order to be a member of the class.
class-map-
name Enter a name of the class for the class map in a character
format (32 character maximum).
layer2 Enter the keyword
layer2
to specify a Layer 2 Class Map.
The default is Layer 3 .
Quality of Service (QoS)
1487