Dell Networking Z9500, Справочник по командам

Страница: 1187 / 1905

detail (OPTIONAL) Enter the keyword
detail
to display all the TLV
information, remote management IP addresses, timers, and
LLDP tx and rx counters.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Modified output of detail parameter to display remote
management IP addresses.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information Omitting the keyword
detail
displays only the remote chassis ID, Port ID, and
Dead Interval.
Example
R1(conf-if-te-1/31)#do show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis
Id
--------------------------------------------------------------
Te 1/21 R2 TenGigabitEthernet 2/11 00:01:e8:06:95:3e
Te 1/31 R3 TenGigabitEthernet 1/11 00:01:e8:09:c2:4a
show lldp statistics
Display the LLDP statistical information.
Z9500
Syntax
show lldp statistics
Defaults none
Link Layer Discovery Protocol (LLDP)
1187