Dell Networking Z9500, Справочник по командам

Страница: 598 / 1905

Q0 5000 5000 0
Dell#
show cpu-queue rate
Display the rates for each control-plane queue.
Z9500
Syntax
show cpu-queue rate [all | queue-id queue-number | range
from_queue to_queue ]
Parameters
all Display the rate for all control-plane queues (CPU queues 0–
23).
queue-id
queue-number
Display the rate for a specified control-plane queue. The
range of CPU queue values is from 0 to 23.
range
from_queue
to_queue
Display the rate for a range of control-plane queues. The
range of CPU queue values is from 0 to 23. Separate the
from_queue value from the to_queue value with a space; for
example,
show cpu-queue rate range 8 15
.
Defaults Not configured.
Command
Modes EXEC Privilege
Usage
Information
This command applies the service-policy based on the type of protocol defined in
the ACL rules.
Create ACL and QoS policies prior to enabling this command.
Example
Dell# show cpu-queue rate all
Service-Queue Rate (kbps) Burst (kb)
-------------- ----------- ----------
Q0 1000 1000
Q1 400 1000
Q2 1800 1000
Q3 1800 1000
Q4 2800 5000
Q5 300 2000
Q6 300 2000
Q7 3200 3000
Q8 400 1000
Q9 400 1000
Q10 1800 1000
Q11 1800 1000
Q12 2000 6000
Q13 5200 3000
Q14 1850 3000
598
Control Plane Policing (CoPP)